Every camera, access panel, Wi-Fi point, and workstation in your building rides on the cabling behind the walls. We build that layer clean, labeled, and tested, so everything on top of it just works.
Cat6 and Cat6A network drops, patch panels and racks that stay organized after we leave, cable pathways planned around your ceilings and conduit instead of fighting them, and terminations tested and certified drop by drop. Whether it's forty drops in a new dental office or hundreds across a production floor, the deliverable is the same: a documented map of your building's nervous system, not a mystery bundle above the ceiling tiles.
Walk into most commercial IT closets and you'll find it: the rat's nest. Unlabeled cables from three different installers, dead runs nobody dares remove, and one overloaded switch running things no one can name. It works until something fails, and then nobody can trace what connects to what. Cabling done right the first time costs a fraction of untangling it later, and it's the difference between a five-minute fix and a day of pulling ceiling tiles.
Site walk. We walk the building, count real drop locations, and check what existing cable is worth keeping.
Design. You get a written scope with drop counts, pathways, and rack layout. No allowances that balloon later.
Installation. We pull, terminate, and dress the cable around your operating hours, so work doesn't stop for us.
Testing and handoff. Every drop is tested and certified, every port is labeled to match the documentation, and you get the map.
Cabling is the one part of your building that should outlive every device attached to it. We size pathways and drops for the cameras, access control, Wi-Fi, and audio systems you'll add over the next decade, which is exactly the work we do on the systems side too. It's why one contractor planning both layers beats a cable puller and a security installer who've never met.
We're a licensed California contractor (Lic #1109846, C-7 and C-61/D28, Alarm Operator #8216) based in Clovis. Cabling isn't a side job we do on the way to selling you something else, it's the foundation trade of everything we install, and we treat the documentation and testing as part of the product. One call: (559) 314-7050.
Cat6 handles most office speeds fine over typical distances. Cat6A carries more bandwidth over the full distance and supports things like high-resolution cameras and newer Wi-Fi points without breaking a sweat. We spec by what's realistically riding on each drop, not by selling the expensive one everywhere.
If it tests clean and it's the right grade for the job, yes, and we'll tell you so. The site walk includes checking what's worth keeping, what needs replacing, and what's just abandoned cable that should come out.
Every drop, both ends, matched to a documented map you keep. It sounds small until the day something fails and your IT person finds the problem in minutes instead of tracing bare cables through the ceiling.
No. We schedule pulls and terminations around your operating hours and work in phases in occupied buildings. Most clients' teams notice the new wall plates before they ever notice us.
We install the physical layer, the cable, racks, panels, and pathways, and we design and install the network gear as part of network design and Wi-Fi work when you want one contractor covering both. Either way the cabling is built to support whatever equipment runs on it.
One free site walk covers your drop counts, your pathways, and what clean cabling would cost for your building.
Schedule Your Free Site Walk