Detectors. Pull stations. Horns and strobes. The panel and the connection to monitoring. Bezemer tests the fire alarm equipment your building depends on and documents what needs attention.
For offices, warehouses, industrial buildings, packing houses, and commercial properties across the Central Valley.
Device testing is part of the job. Documenting the result matters too.
C-10 Electrical ContractorCA License #1109846Alarm Company Operator #8216
What gets checked
The alarm system, piece by piece.
Six parts of the alarm system
DetectionSmoke, heat, and manual initiating devices
ControlPanel, points, circuits, and displayed events
NotificationHorns, strobes, and voice equipment where installed
PowerPrimary supply and standby batteries
CommunicationThe configured reporting path and received signals
InterfacesConnected building functions included in the test plan
Equipment varies by building. The test plan identifies the devices and functions installed at your property.
01
Control panel & annunciators
Review displayed events, device identification, accessible equipment condition, and the panel's response during testing. Existing trouble conditions and disabled points need to be recorded.
02
Detectors & pull stations
Test the applicable initiating devices using methods appropriate to their type and manufacturer. A smoke-entry test and a detector sensitivity check answer different questions.
03
Horns, strobes & voice
Check the notification equipment included in the test plan. Audible and visible testing needs advance notice to occupants and access to the spaces it serves.
04
Primary & standby power
Inspect the power arrangement and evaluate batteries using the applicable procedures. Battery age, condition, connections, and test findings belong in the service record.
05
Offsite communication
Coordinate with the monitoring provider and verify receipt of the intended test events on the right account. Record communication issues and the return from test status.
06
Connected building functions
Identify interfaces such as door release or HVAC shutdown before the visit. Coordinate the required tests with the people responsible for that equipment.
The record you keep
A report you can use when something needs fixing.
Every deficiency needs enough detail to find the equipment again. A device location, test result, and recommended follow-up give your facility team something to act on.
Missing access needs to be recorded too. A detector above a blocked storage area hasn't been tested just because the rest of the building was finished.
Ask what repairs and retesting are included, what needs separate authorization, and who will submit any required report.
Fire alarm test recordTEST FINDINGS
Device identificationPoint number + physical location
ResultWhat happened during the test
Smoke detector / storage areaAccess blocked by stored materials
Not tested
Follow-upOwner to arrange access; contractor to return and test
Still openRecord the retest and completion date
A usable report identifies the device, location, result, limitation, and next action.
Before, during & after the visit
Testing around a working building.
Occupied offices, cold storage, production floors, and tenant spaces all have different access problems. We'll discuss the test window and the equipment that may operate before the visit starts.
Get the records
Last report, device list, panel model, known faults, and any fire department notice.
Arrange the visit
Keys, escorts, high-level access, occupant notices, and coordination for connected equipment.
Test & document
Record results and limitations. Coordinate test signals with the monitoring provider.
Close the visit
Confirm system and account status, explain open findings, and agree on repairs or a return visit.
Scheduling & local reporting
When is your next test due?
Fresno lists an annual fire alarm report. Individual inspection and testing tasks can have different intervals, so the installed equipment and applicable requirements need to be checked.
Fresno Fire Department requires electronic test reports through The Compliance Engine as of April 15, 2026. We'll discuss who files the report and any associated charges before work begins.
Clovis and county properties have their own fire authorities. We'll confirm which requirements apply to the building address.
Have a panel model or a notice from the fire department? Call 559-314-7050.
How long does a commercial fire alarm test take?
Device count, ceiling height, building access, notification tests, and connected equipment affect the visit. Send the last report and tell us about tenant or production restrictions so we can discuss a realistic test window.
Can you test while our business is open?
That depends on what needs to operate and where the devices are. We’ll discuss occupant notices, access, production schedules, and monitoring coordination before setting the appointment.
Is repairing a failed device included?
The proposal should identify included work and repairs requiring approval. A deficiency needs a recorded location and result, followed by the appropriate repair and retest. We’ll explain whether a return visit is needed.
What if we don’t have an old report?
Send the address, panel model, and any notice from the fire department. Tell us what records are missing. We’ll discuss the equipment inventory and the information needed before the visit.
Does the monitoring company test the equipment?
Monitoring and onsite testing are separate jobs. Received signals don’t establish that every detector, horn, strobe, battery, or interface has been physically tested.
Do you test sprinklers or suppression systems?
No. Bezemer handles fire alarms, monitoring, testing, and inspection. A separate qualified contractor handles sprinklers and suppression, including coordinated tests of shared interfaces.
Fresno · Clovis · Central Valley
Need your fire alarm tested?
Tell us the building address, panel model, and when your last test was completed. If there's an inspection notice, send that too.
Device testing is part of the job. Documenting the result matters too.